Static compactors are used to compact the waste into existing containers, such as Roll On Roll Off containers. Static compactors are often bolted onto concrete bases, and are hooked up to waste containers, allowing the waste to be compacted before being loaded into the container.
Network Waste Solutions can supply static compactors in a range of sizes; from the short 2yd up to 4yd static compactors. Being permanent fixtures, Network Waste can install a static compactor customised to your needs and site layout. Below are some of the static compactors we can offer to help your waste management needs.
2 Yard Static Compactor
- Motor Rating: 7.5 kW
- Power Supply Rating: 415 Volt 3 Phase 32 amp
- Control Panel Voltage: 24 Volt
- Clear Aperture Width: 1430mm
- Clear Aperture Length: 1200mm
- Charge Box Depth: 940mm
- Charge Box Volume: 1.61m3
- CHEM Volume Per Stroke: 1.37m3
- Cycle Time: 45 Sec
- CHEM Volume Per Hour: 110.m3
- Overall Height (Top of Flange): 1300mm
2 Yard Static Compactor with Bin Lifter
- Motor Rating: 7.5 kW
- Power Supply Rating: 415 Volt 3 Phase 32 amp
- Control Panel Voltage: 24 Volt
- Clear Aperture Width: 1430mm
- Clear Aperture Length: 1200mm
- Charge Box Depth: 940mm
- Charge Box Volume: 1.61m3
- CHEM Volume Per Stroke: 1.37m3
- Cycle Time: 45 Sec
- CHEM Volume Per Hour: 110.m3
- Overall Height (Top of Flange): 1300mm
- Overall Length: 3620mm
- Overall Width: 2220mm
- Basic Hydraulic Pressure: 150 Bar
- Hydraulic Capacity: 150 Litres
- Total Weight: 2.8 Tonne
2 Yard Static Compactor (with Door)
- Motor Rating: 7.5 Kw
- Power Supply Rating: 415 Volt 3 Phase 32 amp
- Control Panel Voltage: 24 Volt
- Clear Aperture Width: 1430mm
- Clear Aperture Length: 1400mm
- Charge Box Depth: 940mm
- Charge Box Volume: 1.88m3
- CHEM Volume Per Stroke: 1.60m3
- Cycle Time: 45 Sec
- CHEM Volume Per Hour: 1.51m3
- Overall Height (Top of Flange): 1300mm
- Overall Length: 3963mm
- Overall Width: 1720mm
- Basic Hydraulic Pressure: 150 Bar
- Hydraulic Capacity: 150 Litres
- Total Weight: 2.8 Tonne
4 Yard Static Compactor with Bin Lifter
- Motor Rating: 15Kw
- Power Supply Rating: 415 Volt 3 Phase 63 Amp
- Control Panel Voltage: 24 Volt
- Clear Aperture Width: 1500mm
- Clear Aperture Length: 2000mm
- Charge Box Depth: 940mm
- Press Force: 38 Tonne
- Cycle Time: 38 Seconds
- Cylinder Bore: 160mm
- Overall Height (Top of Flange): 1300mm (Not Including Hopper)
- Overall Length: 5100mm
- Overall Width: 1880mm
- Basic Hydraulic Pressure: 150 Bar
- Ram Penetration: 400mm
- Hydraulic Capacity: 250 Litres
- Total Weight: 3.9 Tonne
Compactor Options and Compaction Services
The customisable options for our static compactors can include: -
- Variety of waste loading chutes, such as:
- “Hole in a wall” to external compactor
- Upper level chute to lower level compactor
- Warehouse loading bay enclosures
- Waste loading hoppers
- Safety cages
- Bin lifters / loaders, for emptying wheelie bins into compactors.
All of our static compactors come with pre-full warning lights, so that we can be contacted in advanced when your compactor is nearing its capacity and requires emptying.
Network Waste Solutions can provide the full waste compaction service, from initial site and waste audits, to installation, training, servicing and waste collections. We can provide expert advice on which compactors will be suitable for your waste reduction needs.
Call us on 0845 450 8202 today to find out how Network Waste can help solve your waste compaction needs.
0845 450 8202
